<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="50">
<package pkgid="78ec68bbd00130a5a9300a75c4116303db4b4a3b20c996ad60c1159a012277ef" name="libteam" arch="src">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1336824000">- Initial package for build.opensuse.org</changelog>
  <changelog author="jengelh@inai.de" date="1352894400">- Update to git snapshot 0+git368 [a62cd9309607c6d72d46ef68403a730a6367b827] -
  no changes summary provided by upstream
- Install systemd service file for teamd
- Build and install python bindings</changelog>
  <changelog author="jengelh@inai.de" date="1362052800">- Update to new upstream release 1.0 -
  (no changes summary provided; this is the first tarball release)</changelog>
  <changelog author="jengelh@inai.de" date="1375963200">- Update to new upstream release 1.5
  * lacp: introduce multiple aggregator selection policies
  * lacp: allow to have multiple functions to find out which port
  is better
  * lacp: introduce agg select policy based on per-port config
  options
  * teamd: introduce simple SR-IOV support
  * lacp: do not set state disable if driver does not report speed
  and duplex
  * teamd: add support for multicast group rejoin sending
  * utils: add bond2team conversion tool</changelog>
  <changelog author="jengelh@inai.de" date="1405944000">- Update to new upstream release 1.11
  * add support for TIPC link watcher
  * teamd quits when the device is removed
  * teamd: add support for checking multiple ports IFLA_PHYS_PORT_ID</changelog>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="df7218799dd330403c3b122fa9092c26321969681ad99c3c3db6d9f77c28e5b5" name="libteam-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="ea1392cf1f59e86b020372f87f0c53af4894f905d2dbbe84bd6dcced1c52873e" name="libteam-debuginfo" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="fff3cbb235863fa15c5e9e4776186fa981c9aaddb21e2cf3db50bb0cd34005f8" name="libteam-debuginfo" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="c886b3bc7ea31dde8ba5738d8bef3607f08d98e3929d8a79010bc89274e98552" name="libteam-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="77e961974bfa06c42cb2cbda3aa8e818aec10db94994a7cd961992586017f88e" name="libteam-debugsource" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="306b90ba36d9da5d9c2f5ec5f1002fdfaaff7e0ff42b7175ab4efb49a0fa9161" name="libteam-debugsource" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="396d1e2e9b034ecf80566d47afdb13499918a277fc26f84e5d7265dfb3853fdb" name="libteam-debugsource" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="590084dea39729bd0abba0bfef9953e7c79bb2e5153b370870b43e20f3e74153" name="libteam-debugsource" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="e25464cc013f9d0a7928834df555044b4c67bbd494e416036ed6bcdc70abd88a" name="libteam-devel" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="c953851c917282b186e9db21497622db16b0034d9507ed52508dce4cc380eef4" name="libteam-devel" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="bb161c1f7781c3c5d743a745ecb8e23d42112d2b8b3f23ea0a28c54fd507fb81" name="libteam-devel" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="4f6495d844ce8f524e53141579e00d68499e2f7ed7536eff9605e3ecda98242a" name="libteam-devel" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="c6aa34f12c8d75a27792e986426f148015af6fb4577f580cfb4ad0170b81df02" name="libteam-tools" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="1039a168338405d2843c2bb9bb877ea32e5f10f29cdc82d574ce894823b773ef" name="libteam-tools" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="11367c9f7b7b4ebf49608b224de586b1bf0442a58a1ad2e13e8db2f20df35013" name="libteam-tools" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="f0410d6d0bc19359eaabd7a6af452201f99a49fa41a7d32cca6042d897cda573" name="libteam-tools" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="9dbd478961b787e6b4c51c3de6437671bdddaf3baeaa743cab1760ff6c3dc70c" name="libteam-tools-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="65c10af3559bb02c959992b945ce59b6f31f2251f5236be08f3eaecdd992eabe" name="libteam-tools-debuginfo" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="10bb7021830f12a9ff7db528a9f541a7f8dfd0757c6dd5ae2262f60c32d3e6d1" name="libteam-tools-debuginfo" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="79896b66624b670a7ce83f85b00bfebdc6ddf7a1b301d2b1f7475099823c624d" name="libteam-tools-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="d5e42e7430ba3f22d0ef4af7f936cfc925c8016d4bce7b7438757f0c9071e2cc" name="libteam5" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="86a42973b0863edb41e32c10a91dde5158b2bcc9b98cc4fb1a84046ead2437d0" name="libteam5" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="52ca955d150e3fa26d39652cd699f60d29a088177abd19fd2b5fa1463414d354" name="libteam5" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="f8229ffa3a8364cae99bc046df8d40bc93e9d3065dc2dd112abd0be706b103c6" name="libteam5" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="885e0b5c497f588d5b2024530ca4acd1594aba192ca4303a176d59eba25a9e75" name="libteam5-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="55d6b1bada288500f314927b1120ce36e254ac049fa5468204f52956bcec14bb" name="libteam5-debuginfo" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="3a5d9543732bf844ba1e769115f2b2d38432bb61cd628963d4f35e75f1e3c0c4" name="libteam5-debuginfo" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="46cbf28a63c90b3515d362f0c046ad4ee72c2227e2888fc19bc54c472f36a756" name="libteam5-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="7f78c90632cfd5474810f3e591c87e3334a845f414ab00187a8c680aab9b0911" name="libteamdctl0" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="42c7cd9d56e4ed55438a04cdcd9b4435bae66f69e9aa95c24cf01fa2c1ced44d" name="libteamdctl0" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="f6ea2d01252501e74b6c5acd6cdef7afd454257b7af6b741085be642b9f8893a" name="libteamdctl0" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="968a623e5b71eb4a47ad9a4ca23a2b2efedea57e4058cb894579136c7032e026" name="libteamdctl0" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="97e5319bbf7f810ed154ff37c5a832832c470d56a68fedd49d21c7c66d1c56b7" name="libteamdctl0-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="59eb3ffd1e9b38051e35beebac37535630fe0d6dfc23c789433a9795c6fff35d" name="libteamdctl0-debuginfo" arch="ppc64le">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="b0999dd4d108e0f43d81c7ec63541aa0d1d6d0b8e14bec0caac188fd3e2fdc65" name="libteamdctl0-debuginfo" arch="s390x">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="aecac7906e4896fbc44811d1091d2488fba4174a3251d5cb4284bed459ce8887" name="libteamdctl0-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.29" rel="150600.2.1"/>
  <changelog author="jengelh@inai.de" date="1420718400">- Update to new upstream release 1.15
  * Topology-aware failover with TIPC</changelog>
  <changelog author="jengelh@inai.de" date="1427630400">- Update to new upstream release 1.16
  * teamdctl: show port link down count in state output
  * teamd: lw: count how many times has been the port down</changelog>
  <changelog author="jengelh@inai.de" date="1438344000">- Update to new upstream release 1.17
  * teamd: lw: nsna_ping: fix NA RX and ARP RX handling
  * libteam: ifinfo: fix rtnl dellink handling</changelog>
  <changelog author="jengelh@inai.de" date="1441800000">- Update to new upstream release 1.18
  * teamd: lacp: change actor system value on team MAC change
  * Fix sending duplicate LACP frames at the start of establishing
  a logical channel.
  * Fix teamd memory corruption issues seen by missing port unlink
  in ifinfo_destroy()
  * libteam: Add check to disallow creating device names longer than
  15 characters.</changelog>
  <changelog author="jengelh@inai.de" date="1455192000">- Update to new upstream release 1.22
  * teamd: Fix member port state change on master team admin UP.
  * teamd: add CAP_NET_RAW capability for LACP packet sockets
  * teamd: lacp: update actor state before sending LACP frames</changelog>
  <changelog author="jengelh@inai.de" date="1479729600">- Update to new upstream release 1.26
  * dbus: don't do &lt;deny send_interface="..." /&gt; in template
    dbus s. f.
  * teamd: do correct l3/l4 tx hashing with vlans
  * teamd: lacp: use original hwaddr as source address in lacpdus
  * libteam: fix TEAM_OPTION_TYPE_BOOL type for big-endian
    architectures
  * teamd: handle vlan 0 packets
  * misc: fix an out-of-bound write with zero-length
    hardware address
  * teamd: fix the issue that network blocks when issuing
    `systemctl stop teamd`
  * teamd: lacp: Do not unselect port if it changes state
    to "expired"</changelog>
  <changelog author="ndas@suse.de" date="1511352000">- sync with SLES changes(bsc#1055708)
  * Add check_if_psr_ops_were_initialized.patch:
  * * Fix teamd segfault when link_watch initialization callbacks fail
  (e.g. lw_psr_port_added() in case of activebackup runner) due to
  an attempt to change hwaddr on an enslaved, link up port device.
  Note: enslavement triggers initialization callbacks.
  * Add ignore_ebusy_for_team_hwaddr_set.patch:
  * * Make PortAdd and PortRemove dbus methods work for all runners.
  Ignore attempts to change hwaddr of an already enslaved devices.
  (fate#318389,fate#317728,fate#316923)
- Add start_teamd_from_usr_sbin.patch:
  * Modify service file to start teamd instance from /usr/sbin.</changelog>
  <changelog author="jengelh@inai.de" date="1511352001">- Do not suppress errors from useradd</changelog>
  <changelog author="jengelh@inai.de" date="1511352002">- Update to new upstream release 1.27
  * teamd: escape some sensitive characters in ifname with
    double quotation marks
  * libteam: resynchronize ifinfo after lost RTNLGRP_LINK
    notifications
  * teamd: check port link_up when a port is added with
    loadbalance runner</changelog>
  <changelog author="ndas@suse.de" date="1511352003">- allow send_interface in dbus conf file for wicked.
  [+ 0001-allow-send_interface-dbus.patch]</changelog>
  <changelog author="tchvatal@suse.com" date="1514980800">- Remove defattr that is not really needed
- Add condition around python bindings, they are really based on
  swig code that would need to be rewritten to support python3</changelog>
  <changelog author="jengelh@inai.de" date="1515153600">- Drop /pkg/ subpart from includedir</changelog>
  <changelog author="fbui@suse.com" date="1550836800">- Drop use of $FIRST_ARG in .spec
  The use of $FIRST_ARG was probably required because of the
  %service_* rpm macros were playing tricks with the shell positional
  parameters. This is bad practice and error prones so let's assume
  that no macros should do that anymore and hence it's safe to assume
  that positional parameters remains unchanged after any rpm macro
  call.</changelog>
  <changelog author="jengelh@inai.de" date="1566820800">- Update to upstream release 1.29
  * teamd: remove port if adding fails
  * teamd: add a default value 1000 for link_watch.interval
  * teamd: fix a json object memleak in get_port_obj()
- Update to upstream release 1.28
  * teamd: do not process lacpdu before the port ifinfo is set
  * teamd: add port_hwaddr_changed for ab runner
  * teamd: add port_hwaddr_changed for lb runner
  * teamd: add port_hwaddr_changed for lacp runner
    name
  * libteam: don't crash when trying to print unregistered device
    teamd_event_watch_ops
  * teamd: add port_master_ifindex_changed for
    syslog
  * teamd: add an option to force log output to stdout, stderr or
    DEFAULT to CURRENT
  * teamd: lacp: send LACPDU when port state transitions from</changelog>
</package>
<package pkgid="3e69f62c17f39f088f30b807ee5c988b241d25755e8f6911a1b4527302b42c36" name="wicked2nm" arch="aarch64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="1f5298a996005af1f36f38a5e837eac9161edf4005d1e7c43bcfdfee31127b68" name="wicked2nm" arch="ppc64le">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="f5d74c29c3b48f245dc184354897ce121fb510c8b49768aae99845860c974d43" name="wicked2nm" arch="s390x">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="c3bc907f2370ef25f21a8406e7a845b87696428c63e6353fd8307a74606e23c9" name="wicked2nm" arch="src">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="28b7fac0d5e21f7c2fe959df28de11a7039ee579465f24c27dd5f425e27553fe" name="wicked2nm" arch="x86_64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="72f8c9bb33962fa9268685b4c3ab2cc759a37a4aa2d7c3210b8421ab8a024e88" name="wicked2nm-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="111a8f34d4d703c8f515a4f7c7c3e278e9155c733a4438ce78150ff01c21c8d6" name="wicked2nm-debuginfo" arch="ppc64le">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="427e9fb268cb37649f8e3fd6557d18db183391182bac9fdae404cc2e07f0fb4e" name="wicked2nm-debuginfo" arch="s390x">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="1f139329003f15234ab203499828e39c6445d238615ab7fcc3124622319b094a" name="wicked2nm-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="fd8f79a157014ce9fdd0f90e64e44527517473b2447a55d0ed2567ba0f506129" name="wicked2nm-debugsource" arch="aarch64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="014b646ef8711fadbe73d6915b4da7e966a5dba4c668504e0bca960f8b2fb6b1" name="wicked2nm-debugsource" arch="ppc64le">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="09446d3e7b216883d3191c87dfa91b28827c007eb721580b261acc34ed42d934" name="wicked2nm-debugsource" arch="s390x">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
<package pkgid="66a2fce6648f5dc799d2a1cc7e260faf5f29eada75d6ad0739eb8e0b5e43e46d" name="wicked2nm-debugsource" arch="x86_64">
  <version epoch="0" ver="1.5.0" rel="150600.3.1"/>
  <changelog author="jorik.cronenberg@suse.com" date="1744804800">- Initial packaging @ v1.0.0</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1749643200">- Update to v1.1.0
  * Use agama-network instead of agama-(lib|server)
  * Only activate connections marked with autostart
  * Give hint in error message how to ignore warnings
  * Update README.md with updated installation and usage infos
  * Add support for Leap 15
- Remove BuildRequires that are no longer necessary due to the
  agama-network switch.
- The agama-network switch also removes the vulnerable and
  unmaintained 'users' crate from the dependencies.
  [bsc#1244188]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1753790400">- Update to v1.2.0
  * Fix netconfig handling with proper priority setting
  * Add ovs support</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1755518400">- Update to v1.2.1
  * bump slab from 0.4.10 to 0.4.11 to address CVE-2025-55159
    [bsc#1248010]</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1758888000">- Update to v1.3.0
  * Issue only a info when dhcp.update is non default
  * Add ipv4_static broadcast
  * Apply dhcp settings to mirror wicked client id
  * Fix test.sh, fail if migration succeed but expect fail
  * Fix sysctl handling
  * Avoid cloning in parsing of route
  * Fix continue migration to show all warnings beforehand
  * Improve warning messages - show interface, element names
  * Remove unwrap in route parsing</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1760097600">- Update to v1.4.0
  * Activate only connections if present in the current system
  * Improve error output, exit codes and add flag to disable user
    hints
  * Add support for autoip-fallback</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1770724800">- Update to v1.4.1
  * bump bytes from 1.10.1 to 1.11.1
  * Update time to 0.3.47 (CVE-2026-25727)
    [bsc#1257911]
- Disable `update` in cargo vendor service, as newer agama versions
  are incompatible for now.</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1778587200">- Update v1.5.0
  * Respect create-cid and client-id in interface xml
  * Require at least one file for migrate and show commands
  * Perform extra validation for correct xml file
  * Improve dhcp.update default and user info
  * Update dependencies
  * Allow DHCP+staticIP addresses
  * Fix DHCLIENT_SET_DEFAULT_ROUTE="no"
  * Handle 'STATIC_FALLBACK' and 'NetworkManager' in netconfig
  * Implement team to bond migration
  * Update agama-network to remove dependency on curl
- Reenable `update` in cargo vendor service</changelog>
  <changelog author="jorik.cronenberg@suse.com" date="1781611200">- Require minimum cargo version 1.78 for lockfile version 4 parsing</changelog>
</package>
</otherdata>