<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="16">
<package pkgid="f05814766c73487715dbfce28cfc9c65d75be75d0e2f8c5891269d6ec5bfc01a" name="SuSEfirewall2-snat" arch="noarch">
  <version epoch="0" ver="1.5" rel="5.142"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="9f8a892c394b9e7742e1d02af8a99f280fe014ff10b36a36e5260e670d20e1ea" name="SuSEfirewall2-snat" arch="src">
  <version epoch="0" ver="1.5" rel="5.142"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="e049d6f61d612f9e2e29aeadb6f90f5a95802c3409e82dd52f8ec2f9323fc16e" name="bms-network-setup" arch="noarch">
  <version epoch="0" ver="1.11" rel="26.125"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="6d5fc8a6b1f19384ec4d8ee37d800aaf3ce0da3fef14c39ed356c5bb5b40f496" name="bms-network-setup" arch="src">
  <version epoch="0" ver="1.11" rel="26.125"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="0502ec7ea8b62b161fe27842ac3aff25e2082c2174096466e286af775f5b120a" name="cloud-multiroute" arch="noarch">
  <version epoch="0" ver="0.8" rel="11.142"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="8ed89790a1807a5e0534bdf52a3fbafa5fbc6aa99ec35e1f46e8315eadde92de" name="cloud-multiroute" arch="src">
  <version epoch="0" ver="0.8" rel="11.142"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="79835e0e434a8d012f2134da350b9e7dfbde8c5853ed05471e9374fc22c0e003" name="cloud-otc-keyring" arch="noarch">
  <version epoch="0" ver="2025.1.0" rel="1.69"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="3e98b282f86164c3ceed5023329776a0e924278cb8cb8fbc14bdc2ae737b16be" name="cloud-otc-keyring" arch="src">
  <version epoch="0" ver="2025.1.0" rel="1.69"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="6947236e2740edcf77f98a88dde8d826feeb7551d36ae77c47f299bde041a83c" name="libxenstore_uvp3_0" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.135"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="f7d6bf6c39b4761883c89e3b7e19a2f5013ec1bb3f4517ac33fadb40c9d7ccc2" name="network-hotplug" arch="noarch">
  <version epoch="0" ver="0.4" rel="1.142"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="9c035cd216da3c62842e43374ab50cba25e01b43f36c9397fa92f9b098666989" name="network-hotplug" arch="src">
  <version epoch="0" ver="0.4" rel="1.142"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="5f6631ad01db0d9d5726c329166f2ddfac7723ef57494dc7af9ba7c405c4b722" name="otc-tools" arch="noarch">
  <version epoch="0" ver="0.8.34" rel="10.137"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="99e0d7bdb1afbcb5b082fa9dd57df1a34e9f821f1c33ed927b7de4360ef6bb6d" name="otc-tools" arch="src">
  <version epoch="0" ver="0.8.34" rel="10.137"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="78d23e288beded2d2b8f07a46d4810824ecd2a757092296ec4ab2bf35a1881a3" name="xenstore_uvp" arch="src">
  <version epoch="0" ver="3.0.0" rel="39.135"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="5600ef575d530992bcbd6ceaa5f18245da0362c218b7977f16d4df00d69e6fc9" name="xenstore_uvp" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.135"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="7b45c2f10176e4a73481695020f0db9dd14b3c607a6f3ed8c528557ae3222e75" name="xenstore_uvp-devel" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.135"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
</otherdata>